Bogen Model M60A

Detailed Product Description: Bogen Model M60A - PH11133

The Bogen model M60A is a general purpose
60 watt public address amplifier. Seven inputs are
provided—three for microphones, two for magnetic
phono or tape, and two auxiliary inputs for ceramic
phono or other high level sound sources.

Separate volume controls are provided for the
four input channels and a master volume control sets

the over-all gain. Bass and treble controls are pro-
vided for adjusting the tonal balance.

A monitor speaker may be mounted behind the
speaker grill on the front panel of the amplifier. The
Bogen Model MSK-I Monitor Speaker Accessory is
available for this purpose.

TECHNICAL SPECIFICATIONS

POWER OUTPUT: 60 watts at 3% distortion; 100 watts
peak
FREQUENCY RESPONSE: 20 to 20,000 cps :2 db
POWER RESPONSE: :3 db, 50 to 20,000 cps at 60
watts less than 5% distortion
HUM AND NOISE:
MIC Input: 65 db below rated power
AUX Input: 80 db below rated power
MAG Input: 65 db below rated power
GAIN:
M I C Input:
AUX Input:
MAG Input:
SENSITIVITY:
M I C Input:
AUX Input:
MAG Input:
INPUTS:
3 MIC high impedance (convertible to low imped—
ance with plug-in transformer)
2 MAG phono (or tape head)
2 AUX (high level, high impedance)

122 db
96 db
115 db

9 millivolts
0.4 volts
24 millivolts

OUTPUTS:
4, 8 and 16 ohm speakers
25 volt (10 ohm) balanced
70 volt (82 ohm) balanced (from quick disconnect
sockets)
TONE CONTROL ACTION:
TREBLE: «141/2 db to +12 db at 10 KC
BASS: -9‘/2dbto+15dbat500ps
CONTROLS:
MIC 1 Volume, INPUT 2 Volume, INPUTS Volume
AUX I AUX 2 Volume (fader type)
MIC 1 Selector (high or low impedance)
INPUT 2 Selector (high impedance, low impedance
or mag-tape)
INPUT 3 Selector (high impedance, low impedance
or mag~tape)
MASTER Volume, BASS, TREBLE, POWER Switch
TUBES AND RECTIFIERS:
Two 8417, one 7247, two 6EU7, three silicon
rectifiers
POWER CONSUMPTION: 160 watts
SHIPPING WEIGHT: 29 lbs.

Dimensions: 15" x10" x 6"

  • Sale
  • $175.00
  • Regular price $400.00
Shipping calculated at checkout.